Exclusive Hockey Equipment Retailer of USA Hockey

Bauer Tuuk Lightspeed 2 Limited Edition Black Holder

Bauer Tuuk Lightspeed 2 Limited Edition Black Holder

2010 | 5130-2
  • bvseo_sdk, net_sdk, 2.2.0.2
  • getAggregateRating, method:CLOUD, 62ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • Shipping limited to United States mailing addresses due to manufacturer imposed international policy.
  • Excludes any applicable taxes and shipping costs.

HIGHLIGHTS

  • 20% lighter than TUUK Custom+
  • Impact-tested under -30 degree temperatures
  • 3 mm higher for tighter turning ability 4. Sold individually 5. Black LE color

AVERAGE RATINGS

0 Stars

PRODUCT DESCRIPTION

Featured on Limited Edition Supreme skates, these stealthy black Tuuk Holders offer the same NHL proven specs as the white Lightspeed 2 holder just with a blacked-out and mean look.

  • Improved hardware better locks steel in place
  • Modified shape makes stoning steel easier
  • Optimized height for tighter turns
  • Impact-tested under HECC and CSA helmet standards
  • 20% lighter than Tuuk Custom+ holder
  • 3mm higher than Tuuk Custom+
  • Replacement holder for most high-end Bauer skates
  • Works with all Tuuk Lightspeed runners
  •  Half size skates use half size down holder (i.e. 8.5 skate uses size 8 holder and runner)
  • *Sold Individually*
  • *Runner not included*

 

YOU MIGHT ALSO LIKE

RATINGS & REVIEWS

  • bvseo_sdk, net_sdk, 2.2.0.2
  • getReviews, method:CLOUD, 16ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

PRODUCT Q & A

would these fit on a supreme 3000 boot

I have a pair of Bauer supreme 3000 skates size 14E from the late 90's early 2000's that currently have the Comp ICM. Would i be able to replace the Comp ICM's with these new Lightspeed 2 blade holders and blades.
Asked by: Anonymous
The LightSpeed II holders will fit on the older supreme models. However, new holes might have to be drilled to facilitate the change. If you are able to go to one of our physical stores, they will be able to change the holders for you.
Answered by: ConnerC
Date published: 2015-04-22

Can these fit on Graf g65 boots

Asked by: Heipfam
They will not. The holes on the holders and boots will not line up properly.
Answered by: MikeM
Date published: 2014-04-30

what size would you think would fit in a reebok 9k 2009 mondol

Asked by: Anonymous
Look on the bottom of your holder on the heel. You will see a 3 digit number with an "L" or and "R". That is the holder and steel size you will need to ensure a proper fit. Sometimes additional holes need to be drilled to fit the Tuuk holder to a Reebok boot. This will not affect the integrity of the skate.
Answered by: Nathan
Date published: 2013-02-12

What size for 9.5 senior skate

What size holders should i get if i wear a size 9.5D skate
Asked by: Anonymous
280MM is the correct size holder if you are wearing a Bauer skate with the holder. Different brand skates may require another holder size.
Answered by: Mstein
Date published: 2012-10-25

what size would you recomend for the limited edition bauer supreme one.6 size 10.5

Asked by: Anonymous
A 10.5 D skate by Bauer will take a 288mm holder. 10.5EE would be 296mm
Answered by: Mstein
Date published: 2012-10-03

What size should it be?

I worn size 7EE what size should it be for my skates? I used one.9 Thanks,
Asked by: Teera
The sizing chart for the Tuuk holders are as follows: Skate Size Holder/Runner Size 1D, 1 EE, 1.5 D 212 1.5 EE, 2 D, 2 EE, 2.5 D 221 2.5 EE, 3 D, 3 EE, 3.5D 230 3.5 EE, 4 D, 4 EE, 4.5 D 238 4.5 EE, 5 D, 5 EE, 5.5 D 246 5.5 EE, 6 D, 6 EE, 6.5 D 254 6.5 EE, 7 D, 7 EE, 7.5 D 263 7.5 EE, 8 D, 8 EE, 8.5 D 272 8.5 EE, 9 D, 9 EE, 9.5 D 280 9.5 EE, 10 D, 10 EE, 10.5 D 288 10.5 EE, 11 D, 11 EE, 11.5 D 296 11.5 EE, 12 D, 12 EE 306
Answered by: JCole
Date published: 2012-07-26

will these go on Graf Ultra G35?

Asked by: Anonymous
The LS 2 holders will fit on a Graf boot. Its possible that a few extra rivet holes may have to be drilled but it will not affect the integrity of the skate.
Answered by: Nathan
Date published: 2012-05-25

can these fit on junior vapor 3.0

Asked by: Anonymous
The LS 2 Holders should work on any Bauer skate. For some models, additional rivet holes may have to be drilled, but this will not affect the integrity of the skate.
Answered by: Nathan
Date published: 2012-02-21
  • 2016-08-26T09:50CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_5130_2, PRD, sort_recentAnswersFirst
  • clientName_TotalHockey
  • bvseo_sdk, net_sdk, 2.2.0.2
  • getContent, method:CLOUD, 94ms
  • QUESTIONS, PRODUCT